Water Filter Tap / Faucet 1/4" Push Fit Finished in Satin Chrome

Our drinking water taps are the lever–operated type.
The lever can be held down for a short burst or lifted up and let go to run continuously.
Every faucet comes with a 1/4" pushfit coupling.
You will need to drill a 12mm hole and it is a good idea to buy one of our faucet spanners to tighten the nut.
Attaching to the stem is easy. Push some 1/4" tubing into the supplied coupling and then simply push it onto the stem. A real timesaver.
This tap comes with two spouts. A standard spout plus a long reach spout for when you can’t drill close enough to the kitchen sink. Throw away the one you don’t use.
In addition the words “Drinking Water” have been etched into the body.